News

Hydropad equipment wash racks are offered in 5 weight ratings and 6 sizes.

Using low-temperature waste heat for drying, Rolling Bed Dryer steadily and homogenously mixes non-uniform bulk material.

Capturing 99.999% of particles up to 0.1 micron with its HEPA filter, portable CS 1225 H weighs less than 25 lb and comes with 15 ft hose and 25 ft power cord. Tool to hose adapter supports connection to portable power tool while it is in operation, and automatic shut-off sensor protects motor and filters during wet vacuuming. Set to activate automatically or manually, Electromagnetic Pulse Filter Cleaning System shakes HEPA filters to remove dust

Used for cleaning, deodorizing, or disinfecting, premoistened wipes come packaged in portable and recyclable, self-dispensing tubs. Wipes are preloaded with appropriate amount of cleaning formulations, facilitating use wherever needed. Complementing green cleaning and recycling programs, ready-to-use product is disposable and helps prevent cross contamination

Available for up to 100 ft of 5,000 psi hose, Series CT is powder coated at component level for maximum corrosion resistance. Reels feature balanced brass swivel and brake assembly attached to main shaft, eliminating de-spooling when reel is not in use. Inlet hose connects to swivel through tubular base

Formula 578 Flash Foam offers rich lather with optimized lubricity that enables foam, cloth, and brushes to glide over vehicle surfaces. Suited for use in short tunnels and in-bay rollovers where accelerated and complete rinsing is required, quick-rinsing friction detergent combines foaming and cleaning properties in non-corrosive and reclaim-compatible product that may be applied via foamers, central soapers, and prep guns. This story is related to the following:

Equipped with 48 Vdc motor operating at 3,600 rpm, Bronco Hybrid OPTIMUM runs for 6-8 hr on fully charged battery, or can be cord-powered from 110 V current.

Featuring upright dolly design for one-person transport, PEX Series includes CRI Silver-certified 200 model with adjustable pressure from 50-200 psi and dual 2-stage vacuum motor, as well as CRI Gold-certified 500 providing 50-500 psi and dual 3-stage vacuum motor. Both units deliver on-demand 212

PEX series includes CRI Silver-certified 200, which is adjustable from 50-200 psi, and CRI Gold-certified 500, which is adjustable from 50-500 psi. Both versions have open-pallet configuration that facilitates service and maintenance, and 200 and 500 models respectively feature dual 2- and 3-stage vacuums.

Forming chemical bond with stencil surface, DEK Nano-ProTek minimizes ability of flux to stick to aperture and bottom side of stencil, enabling stainless steel or nickel stencils to be easily cleaned for optimal results.