Eureka C2094G Heavy Duty Cloth Bag Upright Commercial Vacuum
- Simple, maneuverable, and strong
- Six different carpet-nap settings; easy-access dial from low pile to thick plush
- Wide bumper protects furniture and baseboards; back-mounted cloth bag zips open
- Weighs 20 pounds; includes 50-foot power cord
- Bright headlight, two cord hooks, foot-controlled power switch
Great for high-speed, large-area cleaning, this Eureka upright vacuum is simple, maneuverable, and strong. Though not appropriate for bare floors, the vacuum features six different carpet-nap settings, tuned with an easy-access dial that ranges from low pile to thick plush. The no-nonsense construction of the vacuum makes it easy to push and turn, while the wide bumper protects furniture and baseboards. The back-mounted cloth bag zips open completely for easy removal of the inner paper bag. The stout metal brush roll on this machine stands up to abuse and thoroughly sweeps and combs carpet for deeper cleaning. The handle–released with a foot pedal–can go flush with the floor for vacuuming under furniture. Though this model doesn’t come with hoses, attachments, or extra gadgets, it’s a reliable, powerful way to clean all kinds of carpet. At 20 pounds, it’s not exactly a lightweight, but the spare design lets you turn it on a dime. Eureka makes this upright with a bright headlight, two
List Price: $ 280.00
Price: $ 176.66
More Electrolux Vacuum Cleaners
Sidekick II 2 Electrolux Vacuum Cleaner Attachment Model 1753 120 Volts 60 HZ .5 Amps E7893 LR 45342…
The S-bag Classic fits any Electrolux Oxygen or Harmony canister vacuum. It sets the standard for clean with high filtration level…
Electrolux Sanitaire – Commercial Standard Upright Vacuum, 19.8 lbs, Red/Gray – Sold As 1 EachThis workhorse will provide you with…
Looks like I found It.,
We call my wife the Vacuum Lady.All she does is Vacuum .When she gets home from work the first thing she does is grab the vacuum. We’ve had our 5 amp professional Eureka Vacuum since 1977. Although it’s pretty beaten up it is still running fine.I wanted to buy her a new one. We bought a new Eureka lightweight and brought it back the next day. The sound was too high pitched and it felt like a toy vacuum.The brush is made out of plastic. In fact with all my research I found out that most are plastic not metal like the Eureka C2094G .The metal ones last forever. Now we finally found the exact replacement the Eureka Heavy Duty Commercial Series . It has a 50 foot cord and that’s the longest you will find.Instead of putting all extras and accessories into the vacuum it is just pure raw power .If you want a vacuum that lasts 25 years this is it.
Was this review helpful to you?
I’ve seen more attractive vacuums,
I used to work in vacuum repair and this vacuum is fantastic. It is tough and it should withstand a fair bit of abuse, and when it comes to cleaning carpet, it will do at least as good a job as many of the far more expensive vacuums. I wanted to get this vacuum for my wife a year ago, but she insisted on a B*ssel for $90, and she has regreted it. Now that I got her this one (I didn’t give her an option this time), she wishes she had listened to me last year. She loves it.
This vacuum holds much in common with the S*nitaire commercial vacuum series (i.e. 600 & 800 series). In fact, it uses many of the exact same parts as the S*nitaires. The part numbers are also the same. The majority of parts are interchangeable and very inexpensive. The single most expensive replacement part is the motor, and a careful shopper can find it online for around $60. The disturbulator (beater bar) bearings are easily replaceable (and inexpensive) should the need arise, and replacement wheels and switches are VERY cheap ($2.66 for a rear wheel, $4.44 for a front wheel, and about $6 for a switch). Cord retainers do break, and that may be the weakest part of the vacuum, but a replacement set is only $6.61.
The vacuum is simple to repair and maintain. The most complicated task is changing the fan should it ever break. This involves a Philips head and possibly a T15 torx (if I remember correctly). Two screws underneath hold the cover on, and then four screws (I think) hold the motor in place. Take the motor out, then remove the pulley (it screws off backwards, I believe), change the fan, and reverse the process. If the foam gasket on the bottom of the motor breaks or is useless, it is easily replaceable as well. If you don’t have a replacement gasket handy, then bead some silicon caulking around the base, then remount the motor, but you won’t be able to use the vacuum until the caulking cures, which should be left alone overnight.
Was this review helpful to you?